Aqua Excellent

Description

Means are needed to adjust the pH of the water and stabilise it

Aqua Excellent pH minus – reduction of high pH water

Aqua Excellent pH plus – increase the low pH of the water

Aqua Excellent Calcium Booster – alkalinity adjustment

Test strips are required for measurement and control.

The ideal pH is 6.8 to 7.2.

Procedure :

Remove the test strip from its packaging and place it horizontally in the water in a whirlpool, swimspa or swimming pool.

After about 3 seconds, pull out, do not shake and compare with the colour scale on the packaging.

If you have measured a higher pH, use pH minus to lower and adjust the pH

Dosage : 20ml will lower you by 0.1 – Ideal pH is 6.8 to 7.2.

Turn the pumps on for a few minutes to mix the water well with the pH adjusting agents and after a few minutes take a check measurement.
If necessary, fine-tune the pH to the desired value.

Additional information

Weight	1,2 kg

Brand

As clean as water can be

Aqua Excellent is an environmentally friendly water care system, that can be used in your spa or hot tub. Aqua Excellent will help you to keep the water in your spa clean in a safe, simple and effective way. With only one weekly treatment Aqua Excellent will help you to prevent calcium deposits in your system. Moreover, Aqua Excellent will loosen and remove the existing calcium deposits. These calcium deposits are the medium where bacteria and other micro-organisms grow. The ozone- or UV-system already in your spa, will do the rest. It will destroy the bacteria and disinfect the water. With extraordinary results: the water in your spa is not only clean, but also looks crystal clear and feels nice and soft.