Description
Means are needed to adjust the pH of the water and stabilise it
Aqua Excellent pH minus – reduction of high pH water
Aqua Excellent pH plus – increase the low pH of the water
Aqua Excellent Calcium Booster – alkalinity adjustment
Test strips are required for measurement and control.
The ideal pH is 6.8 to 7.2.
Procedure :
Remove the test strip from its packaging and place it horizontally in the water in a whirlpool, swimspa or swimming pool.
After about 3 seconds, pull out, do not shake and compare with the colour scale on the packaging.
If you have measured a higher pH, use pH minus to lower and adjust the pH
Dosage : 20ml will lower you by 0.1 – Ideal pH is 6.8 to 7.2.
Turn the pumps on for a few minutes to mix the water well with the pH adjusting agents and after a few minutes take a check measurement.
If necessary, fine-tune the pH to the desired value.
Reviews
There are no reviews yet.